Fitting and care

How to change a watch strap

After fitting, check the spring bars: if a bar moves or clicks when pushed back and forth, there is a gap between tip and lug hole and a different bar is needed.[1]

2 min read · 4 steps · 13 sources

Sourced from 13 maker pages, manuals, standards and established watch press. Last reviewed 24 October 2026.

  1. Prepare a soft surface

    Apple advises placing the watch face down on a clean, soft surface such as a lint-free microfibre cloth before changing the band.[2]

  2. Use the right tool

    Bergeon's spring-bar tools have a point at one end and a fork at the other, in standard and fine versions, with hardened steel tips.[3] Drilled lugs have holes bored through from side to side, which makes spring bars easier to remove.[4]

  3. Release the old strap

    Garmin quick-release bands: slide the quick-release pin on the spring bar, insert one end of the new bar, then slide the pin and align the other end.[5] Samsung's spring-bar models: slide the spring bar inward, pull the strap away, then insert one end of the new bar into a lug and slide the other in.[6]

  4. Fit the new one and check it

    On Apple Watch, hold the band release button and slide the band across; insert the new band with its text facing you until it clicks, and never force it.[2][7] Garmin QuickFit: slide the latch, lift the band off, press the new band into place and check that the latch has closed over the watch pin.[8]

Apple Watch

Apple Link Bracelets must be split into two pieces with the quick release button before removal, and a band that still slides after fitting should not be worn.[2]

Samsung Galaxy Watch

On Galaxy Watch8 Classic bands, rotate the Dynamic Lug first, then align the band and press the band button to attach it.[9]

Google Pixel Watch

Google warns that the Pixel Watch band button must click into the correct position so the watch does not fall off.[10]

Maker systems and boutiques

With IWC EasX-CHANGE, the strap is released by placing a thumb on the button on the back of the strap.[11]

Omega recommends having an authorised partner change straps, publishes videos for owners who do it themselves, and declines responsibility for damage from an incompatible strap.[12]

Panerai encourages owners to have straps, bracelets and buckles fitted at a boutique, service centre or authorised retailer, at no charge.[13]

FAQ

Do I need a tool to change a strap?

For standard spring bars, use a spring bar tool with a fork and a pin end; Apple's band slot and IWC EasX-CHANGE straps need no tool.[3][7][11]

How do I avoid scratching the watch?

Work with the watch face down on a soft, clean surface such as a microfibre cloth, as Apple advises; Panerai also offers complimentary strap fitting at its boutiques, service centres and authorised retailers.[2][13]

How do I know the new strap is secure?

Google says the Pixel Watch band button must click into the correct position. On spring bars, push the bar back and forth: any movement or clicking means there is a gap between the bar tips and lug holes, so a different bar is needed.[1][10]

Find your watch's sizeSearch your model to see its lug width and how its strap attaches.

Search my watch
Next guideStrap care and water2 min read · 12 sources

Sources

  1. aBlogtoWatch ablogtowatch.com
  2. Apple support.apple.com
  3. Bergeon bergeon.swiss
  4. Time+Tide timeandtidewatches.com
  5. Garmin www8.garmin.com
  6. Samsung samsung.com
  7. Apple support.apple.com
  8. Garmin www8.garmin.com
  9. Samsung samsung.com
  10. Google support.google.com
  11. Time+Tide timeandtidewatches.com
  12. Omega omegawatches.com
  13. Panerai panerai.com

Each numbered source was opened and checked by an independent reviewer. We never use strap sellers or retailers as sources.