Before you buy

Buckle width and strap taper

Most straps taper from the lugs toward the buckle; a strap 20 mm at the lugs is typically 18 mm at the buckle.[1] The buckle must match the strap's buckle-end width, not the lug width. Panerai's Luminor GMT, for example, pairs a 22/20 strap with a 20 mm buckle.[2][3]

2 min read · 8 sources

Sourced from 8 maker pages, manuals, standards and established watch press. Last reviewed 24 October 2026.

Reading two widths

Panerai writes taper as two widths in mm in each strap name (for example 24/22.0 mm), depending on case size and buckle width.[3]

Choosing a buckle or folding clasp

Deployant (folding) clasps require straps designed for them, so check the strap specification before fitting one.[1]

Makers sell the same strap with either a pin buckle or a folding clasp; Omega's catalogue lists, for example, Seamaster Diver 300M rubber straps in both versions.[4]

On IWC EasX-CHANGE straps the pin buckle or deployant clasp has its own tool-free spring bar, so it can be moved to a new strap.[5]

Straight straps and tapered bracelets

Straps that do not taper are uncommon; aBlogtoWatch's writer struggled to find a 20 mm strap that stayed 20 mm at the buckle to reuse an original 20 mm buckle.[1]

Taper changes how a watch looks: Rolex's current 36 mm Explorer bracelet tapers to 14 mm at the clasp instead of 16 mm on the previous model.[6]

Bracelets taper too: the Autodromo Group B bracelet goes from 23 mm at the case to 18 mm at the butterfly clasp, and the Deaumar Ensign H-link goes from 22 mm to about 20 mm.[7][8]

Keep the original buckle

Reusing the original buckle is preferable, and on vintage watches the original strap hardware is part of the watch's value.[1]

FAQ

Does the buckle have to match the lug width?

No. It must match the width at the buckle end of the strap, which on a tapered strap is narrower (for example a 22/20 strap takes a 20 mm buckle).[2][3]

Can I fit a folding clasp on any strap?

Not always. Deployant clasps need straps designed for them, so check the strap specification first.[1]

How much do straps usually taper?

A common pattern is 2 mm (20 mm at the lugs to 18 mm at the buckle), though some bracelets taper more, such as 19 mm to 14 mm on the current 36 mm Explorer.[1][6]

Find your watch's sizeSearch your model to see its lug width and how its strap attaches.

Search my watch
Next guideHow to change a watch strap2 min read · 4 steps · 13 sources

Sources

  1. aBlogtoWatch ablogtowatch.com
  2. Panerai panerai.com
  3. Panerai panerai.com
  4. Omega omegawatches.com
  5. Time+Tide timeandtidewatches.com
  6. Fratello fratellowatches.com
  7. Worn & Wound wornandwound.com
  8. Worn & Wound wornandwound.com

Each numbered source was opened and checked by an independent reviewer. We never use strap sellers or retailers as sources.