Rolex Turn-O-Graph

Rolex Turn-O-Graph strap sizes, reference by reference.

Indicative information. Check your watch before buying a strap: wristreet.com is not responsible for an incorrect size.

Watch line0 references
Illustration, not drawn to scale: case and lug width not on record

No photo of the Rolex Turn-O-Graph yet. Do you own one?Share a photo

The story · Since 1953

The story of the Rolex Turn-O-Graph

In 2004 Rolex cut a 60-minute scale into the Datejust's fluted gold bezel and let it turn, with red seconds, red date and red lettering. Seven years later the Turn-O-Graph left the catalogue with no successor.

600

Japan edition pieces with green details (300 white, 300 black)

Read the full storyHide the story
600Japan edition pieces with green details (300 white, 300 black)
58 yearsTurn-O-Graph production span until 2011
20 mmlug width of the 116264 measured by The Watch Observer
44.25 mmlug-to-lug length of the 116264

Chapters

  1. 1953 to 2003

    Fifty years of a turning bezel

    The Turn-O-Graph began in 1953 as ref. 6202, whose rotating bezel measured elapsed time. From ref. 6309 onward it lived inside the Datejust family with a gold bezel. Later models without the Turn-O-Graph name on the dial looked like alternate Datejusts.

  2. 2004

    Fluted, tapered and red

    Rolex launched the final generation in 2004. The case gained more tapered lugs, and the bezel switched from engine-turned to fluted while keeping its timing numerals. Red seconds, a red date and red TURN-O-GRAPH lettering marked it apart from a plain Datejust.

  3. 2004 to 2011

    Rolesor versions

    Fratello names the Yellow Rolesor 116263 and the 116264 in steel and white gold (White Rolesor) among the references of this generation, all on calibre 3135.

  4. 2004 to 2011

    New bracelets, smoother bezel

    The steel 116264 tested by The Watch Observer came on the new solid-link Oyster bracelet with a lever-opening clasp and a hidden Easylink extension. Jubilee versions used a concealed clasp. The bidirectional bezel turns on a friction spring, so it rotates continuously instead of clicking like a Professional diver.

  5. 2011 onward

    Retired after 58 years

    Rolex ended production in 2011. Some stock lingered: Christie's sold a 116264 in 2025 that was first sold new only in 2019. Fratello has publicly asked Rolex to bring the model back.

Moments

Christie's sold a 116264 dated circa 2011 for USD 6,985 in a sale that closed on 9 December 2025. The watch had sat unsold at a retailer until 2019, with a warranty card from that year.

Bonhams sold a 116264 with blue sunburst dial, circa 2004, for HK$76,500 including premium in its 30 August to 9 September 2021 online sale.

Phillips sold a new-old-stock 116264, circa 2005, from its original owner for HK$94,500 against an estimate of HK$24,000 to 40,000, with its April 2005 Hong Kong guarantee.

Generations and strap changes

  1. 2004
    Ref. 116263

    Yellow Rolesor version: steel case with yellow gold bezel, also on calibre 3135. Fratello's pick paired a dark charcoal dial with a Super Jubilee bracelet.

    Fratello describes a Super Jubilee bracelet with a concealed clasp; Christie's catalogued a steel and 18k gold Oyster bracelet with deployant clasp.

0 Rolex Turn-O-Graph references

FAQ

Which bracelets did the last Turn-O-Graph come on?

Either the Oyster bracelet with solid links, a lever-opening clasp and Easylink extension, or the Jubilee with a hidden (concealed) clasp. Auction lots show both on the 116264.

What is the lug width of the Turn-O-Graph 116264?

20 mm. The Watch Observer's test of the 116264 lists 20 mm between the lugs.

How large does it wear?

The Watch Observer measured 36 mm without crown, 44.25 mm lug to lug and 12.68 mm high, at 124 g on its steel bracelet. Fratello notes the gold fluted bezel makes it look more prominent than 36 mm suggests.

Does the bezel click like a Submariner's?

No. It is bidirectional and held by a friction spring, so it turns smoothly without clicks, unlike the ratchet bezels of Rolex Professional models.

Other Rolex collections

Help

What is lug width?

The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.

Measure it in 30 seconds

  1. Take the strap off, or look at the back of it: many straps print their width.
  2. Measure the inside gap between the lugs with a caliper or a millimetre ruler.
  3. Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.

Strap, quick release or system?

Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.