Rolex Precision

Widths differ across this line. Enter or pick your exact reference to get its width.

16 or 17 mm

Verification: Listed in our database

Attachment: spring bars

31 to 32 mm cases · 1940 to 1950

Pick your reference

Filter references by lug width

Indicative information. Check your watch before buying a strap: wristreet.com is not responsible for an incorrect size.

Watch line5 references
17 mm
Illustration drawn to scale: 32 mm case, 17 mm lugs

No photo of the Rolex Precision yet. Do you own one?Share a photo

The story

The story of the Rolex Precision

On a vintage Rolex Oysterdate Precision, the word Precision meant a non-chronometer-grade movement. These hand-wound watches were Rolex's entry-level models and a gateway into vintage Rolex.

34mm

34mm: case of the Oysterdate Precision references Gear Patrol covers (some had 31mm cases)

Read the full storyHide the story
34mm34mm: case of the Oysterdate Precision references Gear Patrol covers (some had 31mm cases)
58 hourspower reserve of the hand-wound calibre 1210 in a 6426

Chapters

  1. 1930s to 1940s

    Small hand-wound Oysters

    In the 1930s and 1940s, Rolex sold small manual-wind Oysters whose dials paired a model name such as Speedking or Royal with the word Precision. Auction examples of ref. 4220 measure about 29mm, with screw-down crown and screw back.

  2. 1940s to 1950s

    Snap-back dress watches

    Rolex also sold round gold dress watches with snap-on backs signed Precision, some with 17-jewel manual movements and the patented Superbalance. Cases ran from about 31mm to 35mm, and some came in Dennison cases.

Moments

Rolex did not print Superlative Chronometer Officially Certified on the Oysterdate Precision models, whose movements were not chronometer-grade; their dials carry the word Precision instead.

Generations and strap changes

  1. circa 1946
    Ref. 4220

    Small steel Oyster with sweep centre seconds and a 15 or 17-jewel manual movement, sold with Speedking or Royal names on the dial alongside Precision.

    Bonhams and Christie's give a 29mm case.

5 Rolex Precision references

Rolex Precision references in our database. Each card says where its width comes from: listed by the maker (linked to the maker's page in the details), two independent sources agree, or listed in our database and not yet verified by us.

  • 4220

    Precision

    Lug width: 17 mm

    Source: Listed Attachment: Spring bars

    Case size: 31 mmYear: 1940Silver dialCase material: Steel

    Attachment
    classic lugs
    Movement
    Manual
    Caseback
    Screw-down steel
    Production
    1940-1946
    Status
    Listed in our database, not yet verified
  • 4222

    Precision

    Lug width: 16 mm

    Source: Listed Attachment: Spring bars

    Case size: 31 mmYear: 1940Black dialCase material: Steel

    Attachment
    classic lugs
    Movement
    Manual
    Caseback
    Screw-down steel
    Production
    1940-1946
    Status
    Listed in our database, not yet verified
  • 4411

    Precision ref.

    Lug width: Width not listed yet

    Source: Listed

    Case size: 34 mmYear: 1942Silver dialCase material: 18K Gold

    Movement
    Manual Chronometer
    Caseback
    Screw-down steel
    Production
    1942-1945
    Status
    Listed in our database, not yet verified
  • 4498

    Precision

    Lug width: 16 mm

    Source: Listed Attachment: Spring bars

    Case size: 31 mmYear: 1946Two-Tone dialCase material: Steel

    Attachment
    classic lugs
    Movement
    Manual
    Caseback
    Screw-down steel
    Production
    1946-1952
    Status
    Listed in our database, not yet verified
  • 6020

    Precision

    Lug width: 17 mm

    Source: Listed Attachment: Spring bars

    Case size: 32 mmYear: 1950Black dialCase material: Steel

    Attachment
    classic lugs
    Movement
    Manual
    Caseback
    Screw-down steel
    Production
    1950-1958
    Status
    Listed in our database, not yet verified

Verified: the width is listed by the maker or confirmed by two independent sources. The other widths are listed in our database.

FAQ

What lug width does the Rolex Precision use?

Rolex Precision references use 16 mm or 17 mm depending on the reference and case size, so check yours in the list below. The most common is 17 mm (2 of 4 references with a known width). These widths are listed in our database; the maker check is in progress.

Do all Rolex Precision references take the same strap?

No. 2 different lug widths appear across the line, often by case size or generation. Check the reference engraved on the case back or between the lugs.

What lug width does the Oyster Precision 6426 have?

19mm. Fratello measured 19mm lug spacing on a 34mm case with a 42mm lug-to-lug.

Can an Oysterdate Precision go from bracelet to strap easily?

Yes. Many were first sold on a steel Oyster bracelet, and Gear Patrol notes the references it covers all have drilled lug holes for easy strap and bracelet swaps.

What did the snap-back Precision dress watches come on?

Auction examples include leather straps with a signed Rolex buckle; one 14ct gold example came on a 9ct gold bracelet.

Other Rolex collections

Help

What is lug width?

The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.

Measure it in 30 seconds

  1. Take the strap off, or look at the back of it: many straps print their width.
  2. Measure the inside gap between the lugs with a caliper or a millimetre ruler.
  3. Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.

Strap, quick release or system?

Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.