Rolex Mono-Pusher Chronograph

Rolex Mono-Pusher Chronograph strap sizes, reference by reference.

Indicative information. Check your watch before buying a strap: wristreet.com is not responsible for an incorrect size.

Watch line1 references
Illustration drawn to scale: 34 mm case, lug width not on record

No photo of the Rolex Mono-Pusher Chronograph yet. Do you own one?Share a photo

The story · Since 1937

The story of the Rolex Mono-Pusher Chronograph

CHF 387,750

Price realised by Christie's for ref. 3346 Zerographe, 13 May 2013

Read the full storyHide the story
CHF 387,750Price realised by Christie's for ref. 3346 Zerographe, 13 May 2013
at best 12Statistical estimate of total ref. 3346 produced, per Christie's essay
32 mmCase diameter of ref. 3346 Zerographe
fourRef. 3346 examples identified by serial number, per Christie's essay

Chapters

  1. 1937

    Zerographe: the first in-house chrono

    Phillips dates ref. 3346 to 1937 and lists a 32mm stainless steel case. Christie's calls it the first Oyster chronograph model produced by Rolex, and the first to be powered by an in-house movement. The pusher resets a continuously running seconds hand, and the bezel is calibrated to 60.

  2. circa 1939

    A tonneau case, one button

    Christie's catalogued ref. 3479 as a small stainless steel single-button chronograph from circa 1939. Its pusher sits in the band rather than in the crown. The case is tonneau-shaped and measures 29mm, and the watch sold for USD 22,500 in 2015.

  3. 1940s

    Ref. 3890: smooth bezel, steel only

    The smooth-bezel sister of the 3346 is ref. 3890. Antiquorum's Geneva sale of November 2024 sold a new old stock example for CHF 212,500. The catalogue says it was only available in steel, and the sale page dates it to the 1940s.

Moments

2024. Antiquorum sold lot 592 in Geneva on 10 November 2024, against an estimate of CHF 150,000 to CHF 250,000, with the watch described as new old stock.

2015. Christie's sold the small tonneau-cased ref. 3479 for USD 22,500 on 17 June 2015, against an estimate of USD 8,000 to USD 12,000.

2013. Christie's sold case 146'276 on 13 May 2013, estimate CHF 250,000 to CHF 350,000, with a black lacquer California dial and a revolving bezel.

Phillips offered case 146'275 in its START-STOP-RESET sale with an estimate of CHF 250,000 to CHF 500,000. The sale year is not printed on the lot page read.

Generations and strap changes

  1. circa 1939
    Ref. 3479 single-button

    A small tonneau-cased single-button chronograph with a Rolex stainless steel buckle, catalogued by Christie's as signed 29mm.

    Christie's lists a stainless steel Rolex buckle, with no bracelet or lug width stated.

  2. circa 1946
    Ref. 4500 Oyster Monoblocco

    Ref. 4500 Oyster Monoblocco: Screw down back and crown, flanked by twin pushers, and a 30 minute register on a manual wind column wheel chronograph movement.

    Bonhams lists brown associated alligator leather and an associated steel buckle.

1 Rolex Mono-Pusher Chronograph references

Rolex Mono-Pusher Chronograph references in our database. Each card says where its width comes from: listed by the maker (linked to the maker's page in the details), two independent sources agree, or listed in our database and not yet verified by us.

  • 2023

    Mono-Pusher Chronograph

    Lug width: Width not listed yet

    Source: Listed

    Case size: 34 mmYear: 1938Silver dialCase material: Steel

    Style
    chrono
    Movement
    Manual Chronograph
    Caseback
    Screw-down steel
    Production
    1938-1942
    Status
    Listed in our database, not yet verified

Verified: the width is listed by the maker or confirmed by two independent sources. The other widths are listed in our database.

FAQ

What bracelet or strap came on the ref. 3346 Zerographe?

Phillips lists a Rolex stainless steel riveted Oyster bracelet with a maximum length of 200mm and a folding deployant clasp. Christie's describes a stainless steel bracelet and a Rolex deployant clasp on its example.

Does the ref. 4500 come with a leather strap?

Bonhams lists brown alligator leather and an associated steel buckle on its example. Bonhams uses the word associated for both, so the strap and buckle are not recorded as original to the watch.

What lug width does a Zerographe take?

None of the pages read for this line state a lug width. Phillips gives the bracelet length and the case diameter only, so no strap width should be assumed from these sources.

What case shape do these early one-button chronographs have?

Christie's describes the ref. 3346 case as tonneau-shaped.

Other Rolex collections

Help

What is lug width?

The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.

Measure it in 30 seconds

  1. Take the strap off, or look at the back of it: many straps print their width.
  2. Measure the inside gap between the lugs with a caliper or a millimetre ruler.
  3. Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.

Strap, quick release or system?

Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.