Longines Chronograph 30CH

Every reference with a known width takes the same strap size. Your reference is engraved on the case back or between the lugs at 6 o'clock.

19 mm

Verification: Listed in our database

Attachment: spring bars

38 mm case · 1953 to 1958

Indicative information. Check your watch before buying a strap: wristreet.com is not responsible for an incorrect size.

Watch line5 references
19 mm
Illustration drawn to scale: 38 mm case, 19 mm lugs

No photo of the Longines Chronograph 30CH yet. Do you own one?Share a photo

Lug widths across the line

The Longines Chronograph 30CH takes a 19 mm strap: all 5 references with a known width use 19 mm.

Filter references by lug width

The story · Since 1936

The story of the Longines Chronograph 30CH

Read the full storyHide the story

Chapters

  1. 1930s to 1936

    The flyback patent

    Longines filed a patent for an instant-reset flyback chronograph mechanism on 12 June 1935, registered on 31 March 1936 and published that June. The device let a wearer send the chronograph hand back to zero and relaunch it in a single press, developed for aviation and professional timing.

  2. 1936 to 1947

    The 13ZN years

    Longines built the patent into the calibre 13ZN in 1936, one of the first flyback chronograph wristwatch movements, and used it for about a decade before seeking a cheaper in-house successor.

  3. 1947 to 1972

    Calibre 30CH equips three lives

    The 30CH, introduced in 1947, used a column-wheel flyback mechanism in a 29.80 mm, 6.20 mm movement and powered three very different watches: the gold dress chronograph ref. 7414, the doctor's pulsometer chronograph ref. 5966, and the waterproof steel sports chronograph ref. 6592, nicknamed 'Spillino' for its tiny pushers.

  4. 1972 to late 1970s

    Renamed 530/538, then retired

    In 1972 Longines renamed the movement Calibre 530, with a seconds-less variant called 538 that powered the cushion-cased Nonius chronograph, ref. 8225, and its vernier scale for tenths of a second. It was Longines' last self-made chronograph calibre; the brand went on to buy chronograph ebauches from Valjoux instead.

Moments

The Italian nickname 'Spillino' ('little pin') was given to reference 6592 for its unusually small pushers. A well-preserved 6592-4 sold at Phillips for CHF 17,500 against an estimate of CHF 8,000 to 16,000.

A Longines reference 5966 doctor's chronograph, originally sold in Belgium in December 1948, was auctioned again at Antiquorum in Geneva on 15 May 2011 for CHF 11,250.

Generations and strap changes

  1. 1947
    Calibre 30CH introduced

    Longines introduced the calibre 30CH as the successor to the 13ZN, keeping the flyback function in a slimmer, cheaper-to-build 29.80 mm movement.

  2. circa 1950s
    Ref. 7414 dress chronograph

    Reference 7414 cased the 30CH in 18k yellow or rose gold for a dress chronograph with dual telemeter and tachymeter scales.

  3. 1948 to 1965
    Ref. 5966 doctor's chronograph

    Reference 5966 fitted the 30CH with a peripheral pulsometer scale so a doctor could start the chronograph, count a set number of heartbeats, and read the pulse rate directly off the dial. Longines' own reference finder places examples of this calibre and case combination between 1951 and 1965, and an archive extract records one example sold in December 1948.

  4. 1957 to 1968
    Ref. 6592 'Spillino'

    The steel, screw-back reference 6592 was fitted with unusually small, pin-like pushers, which earned it the Italian nickname 'Spillino'.

    Documented on a leather strap with a stainless steel Longines pin buckle on surviving examples.

  5. 1972
    Renamed Calibre 530 and 538

    When Longines moved to three-digit calibre numbers in 1972, the 30CH became Calibre 530 in its two-register form and Calibre 538 in the single-subdial form used in the Nonius chronograph.

  6. 1972
    Ref. 8225 'Nonius'

    The Nonius, reference 8225, cased Calibre 538 in a 43 mm stainless steel cushion case with a vernier scale on the central chronograph hand for reading elapsed time to one-tenth of a second.

  7. 1965 (reissued)
    Heritage reissue, boutique exclusive

    Longines later revived a 1965 flyback chronograph as a 38 mm Heritage reissue, serviced by its heritage workshop and sold only through its Geneva boutique.

5 Longines Chronograph 30CH references

Longines Chronograph 30CH references in our database. Each card says where its width comes from: listed by the maker (linked to the maker's page in the details), two independent sources agree, or listed in our database and not yet verified by us.

  • Chronograph 30CH Black

    Lug width: 19 mm

    Source: Listed Attachment: Spring bars

    Case size: 38 mmYear: 1953Black dialCase material: Steel

    Attachment
    classic lugs
    Style
    chrono
    Movement
    Manual Flyback
    Caseback
    Screw steel
    Production
    1953-1958
    Status
    Listed in our database, not yet verified
  • Chronograph 30CH Landeron Case

    Lug width: 19 mm

    Source: Listed Attachment: Spring bars

    Case size: 38 mmYear: 1955Silver dialCase material: Steel

    Attachment
    classic lugs
    Style
    chrono
    Movement
    Manual Flyback
    Caseback
    Screw steel
    Production
    1955-1960
    Status
    Listed in our database, not yet verified
  • Chronograph 30CH Rose Gold

    Lug width: 19 mm

    Source: Listed Attachment: Spring bars

    Case size: 38 mmYear: 1956Silver dialCase material: Rose Gold

    Attachment
    classic lugs
    Style
    chrono
    Movement
    Manual Flyback
    Caseback
    Snap gold
    Production
    1956-1962
    Status
    Listed in our database, not yet verified
  • Chronograph 30CH

    Lug width: 19 mm

    Source: Listed Attachment: Spring bars

    Case size: 38 mmYear: 1957Silver dialCase material: Steel

    Attachment
    classic lugs
    Style
    chrono
    Movement
    Manual Chronograph
    Caseback
    Snap steel
    Production
    1957-1965
    Status
    Listed in our database, not yet verified
  • Chronograph 30CH Anti‑Magnetic

    Lug width: 19 mm

    Source: Listed Attachment: Spring bars

    Case size: 38 mmYear: 1958Silver dialCase material: Steel

    Attachment
    classic lugs
    Style
    chrono
    Movement
    Manual Flyback
    Caseback
    Snap steel
    Production
    1958-1964
    Status
    Listed in our database, not yet verified

Verified: the width is listed by the maker or confirmed by two independent sources. The other widths are listed in our database.

FAQ

What lug width does the Longines Chronograph 30CH use?

The Longines Chronograph 30CH takes a 19 mm strap: all 5 references with a known width use 19 mm. These widths are listed in our database; the maker check is in progress.

Does the flyback pusher on the 30CH chronograph affect what strap it takes?

No. The flyback mechanism resets and restarts the chronograph without first stopping it and does not affect strap or bracelet fitting; original 30CH watches are documented on leather straps.

Is the modern Longines 30CH heritage reissue the same size as the originals?

Close to it. The heritage reissue of the 1965 flyback chronograph is cased at 38 mm, in line with the 36 to 38 mm case sizes recorded for original 1950s and 1960s 30CH chronographs.

Other Longines collections

Help

What is lug width?

The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.

Measure it in 30 seconds

  1. Take the strap off, or look at the back of it: many straps print their width.
  2. Measure the inside gap between the lugs with a caliper or a millimetre ruler.
  3. Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.

Strap, quick release or system?

Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.